0.96" OLED Module 128x64 Pixel White - I2C/SPI 7 Pin-out
€6.90
Product information "0.96" OLED Module 128x64 Pixel White - I2C/SPI 7 Pin-out"
0.96" OLED module – 128×64 pixels, white, I²C/SPI, 7-pin connector. Compact OLED display for microcontroller projects. No backlight needed – each pixel emits its own light. High contrast, wide viewing angle, low power consumption. Compatible with Arduino, Teensy and other 3.3 V/5 V boards.
Key Technical Specifications
- Display size: 0.96 inch
- Resolution: 128 × 64 pixels
- Colour: white
- Interfaces: I²C and SPI (switchable)
- Pinout: 7-pole
- Driver IC: SSD1306
- Operating voltage: 3.3 V – 5 V
Typical Applications
- Status displays: values, states or menus in custom electronics projects
- Wireless DMX interfaces: channel display or status feedback for custom DMX controllers
- Teensy projects: directly controllable from the Teensy 3.2 (K40060) via I²C or SPI
- Prototyping: quick output of sensor or diagnostic values
Frequently Asked Questions
The module supports both protocols, switched via solder bridges or resistors on the back. I²C requires only 2 data lines (SDA, SCL) and is simpler to wire, but slower. SPI requires more pins but offers higher refresh rates – relevant for animated content.
The widely used library in combination with works directly with Teensyduino and the Arduino IDE. For I²C operation, the standard Wire library is the foundation.
The 1.3" module (K40057) has the same resolution (128×64) but a larger display area – text and graphics are easier to read. The driver IC in the 1.3" model is an SH1106 instead of SSD1306, which requires a different library configuration.
Typically 20–30 mA in operation. OLEDs consume less power than backlit LCD displays and are therefore ideal for battery-powered projects.
| Display Color: | Weiß |
|---|---|
| Display Resolution: | 128 x 64 Pixel |
| Driver: | SSD1306 |
| Height: | 3.80 mm |
| Input Voltage nominal: | 2.5 - 5.5 VDC |
| Interface: | 3/4-wire SPI, I2C |
| Length: | 27.20 mm |
| Technologie: | Passive Matrix OLED |
| Width: | 27.20 mm |
Manufacturer information according to GPSR
Shenzhen Liyuan Huida Technology Co.,Ltd
213, 2nd Floor Xinhu Street
Guangming District
Shenzhen, Guangdong
China
Manufacturer website
Responsible person according to GPSR
Graf Lichttechnik UG
Goerzallee 299
14167 Berlin
Germany
info@graf-lichttechnik.de
+49 151 22348820